Henderson 3mm Free Dive Men's Wetsuit John New after years of development Henderson enters the Freedive market with a revolutionary new Digital Ocean Camo pattern. Henderson’s exclusive copyright protected pattern is designed to work effectively in all water colors. The Henderson Free Dive Camo john is constructed of Henderson’s Thermoprene(tm) rubber which features an ultra soft but durable interior skin lining with double glued and blind stitched construction. The Henderson Freedive John has been engineered to provide exceptional warmth for extend Freedive sessions. Each unit of the two piece design is available in 3mm and 5mm. This is the 3mm version.
The John and Hood attached Jacket are sold separately which will allow divers to mix and match sizes and thicknesses to meet their specific diving conditions. The attached hood jacket features large hook and loop beaver tail for comfort as well as a flow vented hood to allow trapped air or regulator exhaust to escape (in the event the suit is used with SCUBA). A large loading pad with the Bold Henderson Freedive logo is prominent on the chest while generous elbow pads cover the high wear areas of the arms. Swim silent, swim stealth with the most advanced Freedive suit on the market. The John offers a single hook and loop shoulder entry along with soft and durable Freedom Flex knee pads.
Welcome to the Size Recommendation tool. This size recommendation is for the specific brand wetsuit you are looking at. You can enter measurements in Feet and Inches or Centimeters and Kilograms.
* It is possible that you fall between sizes, if you do we will recommend more than one size.
* Make sure you check your size recommendation for each style wetsuit you are interested in. Each manufacturer has their own size chart and your size may be different from brand to brand and from style to style so make sure you check your size in each wetsuit you are interested in.
* This tool was developed to provide you with the best possible size recommendation based on the information provided by you and the manufacturer. The size chart is published by the manufacturer and Pleasure Sports makes no guarantee on size recommendations.
MEN’S SIZES
XS
SM
MED
LRG
XLRG
3XL
CHEST
34″-36″
36″-38″
38″-40″
40″-42″
42″-44″
46″-48″
WAIST
29″-31″
31″-33″
33″-35″
35″-37″
37″-39″
41″-44″
WEIGHT
125-135
135-150
150-170
170-190
190-210
230-250
HEIGHT
5’5″-5”7″
5’7″-5’9″
5’9″-5’11″
5’10″-6′
5’11″-6’1″
6’1″-6’3″
When selecting your wetsuit size it is important to take the time to measure yourself. To take your body measurements, you will need a flexible tape measure that you can wrap around your body parts. You can find these tapes at tailor shops, clothes shops and sporting goods stores. As an alternative you can also use a piece of rope, string or fishing line along with a yard stick to measure the length.
The tape should be pulled to where it is lying flat against the skin all the way around. The tape should not be pulled too tight but it also should not be too loose.
Neck - Standing, measure your neck at its largest girth, right over the Adam's apple.
Chest - Standing, measure with breath out just above the nipple.
Waist - Standing, measure at the narrowest point or at the midway point between the top of the hip bone and the bottom of the rib cage.
Hips - Measure at the largest girth, where the butt is protruding the greatest.
What is the most important factor in determining wetsuit size?
Unfortunately there is no easy answer to this question. The more measurements fall within a recommended size, the better! We tend to look at height, weight and chest primarily when recommending sizes. However, the material (stretch) and thickness (mm) also are a factor.
What does the "s" and "t" stand for in sizes MS, MT, LS, LT, ect.?
The "s" stands for "short" and the "t" stands for "tall". These sizes are meant for individuals who are shorter or taller than average. The suits will be shorter or longer in the torso, legs and arms.
I wear a MS in O'Neill, will a MS in Body Glove fit the same?
Not necessarily. Every wetsuit manufacturer cuts their suits differently and they each have a unique size chart. The size you wear in another brand may be used as a guideline but you should always look at the size chart for the specific brand you are purchasing before making a sizing decision.
I am in between sizes, should I go up or down in size?
Again, there is no absolute answer to this question. In general, you want your wetsuit to be a snug fit as opposed to being loose. The stretch and thickness of the suit will play a role in determining whether to go up or down in size. We are happy to provide personalized service and you can send us an email at orders@pleasuresports.com - please be sure to include the wetsuit you are considering, your height, weight, chest and waist measurements. You may also give us a call at 866-573-0702.
When selecting your wetsuit size it is important to take the time to measure yourself. To take your body measurements, you will need a flexible tape measure that you can wrap around your body parts. You can find these tapes at tailor shops, clothes shops and sporting goods stores. As an alternative you can also use a piece of rope, string or fishing line along with a yard stick to measure the length.
The tape should be pulled to where it is lying flat against the skin all the way around. The tape should not be pulled too tight but it also should not be too loose.
Home
